Summary

The TMR27-NM06 Aurelia Horizon is a horizontal wall mirror designed for bathroom vanities, entryway consoles, hotels, apartments, villas, and other contract interiors. It uses genuine natural marble only at the two ends, leaving a large central mirror area and reducing the weight, stone consumption, and production complexity of a full-marble surround. Standard production MOQ is 20 pcs per size and finish, with an estimated lead time of 30–60 days, and custom sizes are available after structural review.

Key Specs

Why This Version for Bulk Orders

NM06 was developed as a more production-friendly natural marble mirror for buyers who need a premium material story without the weight and cost of a full stone frame.

The design uses two controlled marble modules at the left and right ends instead of surrounding the entire mirror with stone. This keeps the central reflective area large and makes the product easier to standardize across multiple widths.

For bulk programs, the controlled horizontal geometry offers several practical advantages:

• More repeatable stone cutting
• Easier dimensional control
• More predictable assembly
• Simplified quality inspection
• Better compatibility with standard vanity widths
• Easier development of multiple-size programs
• Lower stone consumption than a full marble surround

Potential width extensions include 1000, 1200, 1400, 1500, and 1600 mm, subject to structural and packaging review.

Material & Process Limits

Natural marble is a variable material. Veining, tone, mineral distribution, and pattern density will differ from piece to piece.

Perfect vein matching between the left and right marble panels is not included as standard. Buyers requiring tighter color matching, selected slabs, similar vein direction, or paired left/right appearance should request additional stone-selection service. This may increase cost and lead time.

The marble modules must retain sufficient structural width. Excessively narrow stone strips may increase the risk of breakage during cutting, assembly, transportation, or installation.

Large custom widths require additional review of:

• Rear reinforcement
• Mirror flatness
• Wall mounting
• Packaging
• Transportation risk

The inner champagne-gold divider must remain slim and flush with the marble and mirror surface. A raised decorative second gold frame is not part of the approved NM06 construction.

Why Buyers Use NM06 Instead of a Standard Horizontal Mirror

A standard metal-framed mirror is easier and cheaper to produce, but it offers limited material differentiation.

A full-marble framed mirror creates a stronger stone presence, but it also increases weight, stone consumption, packaging requirements, and visual heaviness.

NM06 is positioned between these two categories.

It provides:

• Genuine natural marble differentiation
• Large usable mirror area
• Lower stone consumption than a full marble frame
• More controlled product weight
• A more contemporary architectural appearance
• Better suitability for bulk and project programs

For buyers developing a premium mirror assortment, NM06 offers a practical way to add natural stone without turning the product into a heavy stone-framed mirror.

Designed for Vanity and Console Applications

The horizontal format is particularly suitable for furniture and project applications that require a wide reflective surface.

Recommended uses include:

• Bathroom vanity
• Double vanity
• Powder room
• Entryway console
• Hotel guest room
• Hotel bathroom
• Luxury apartment
• Serviced apartment
• Villa
• Model home
• Clubhouse
• Residential development
• Hospitality project

A 1200–1400 mm NM06 can be installed above a long vanity or double-sink cabinet while maintaining a balanced relationship between the two stone end modules and the central mirror surface.

Application Example: Hotel Double Vanity

In a hotel suite or premium apartment bathroom, NM06 can be installed above a wide vanity or double-sink cabinet.

The two natural marble end panels can coordinate with:

• Stone countertops
• Brushed brass faucets
• Champagne-gold hardware
• Warm wood cabinetry
• Neutral ceramic surfaces

Compared with a full marble frame, the localized stone design reduces visual weight while retaining a clear premium material signal.

Genuine Natural Marble

The decorative end panels use genuine natural marble rather than printed film, PVC veneer, resin, or artificial marble coating.

Each panel will naturally vary in:

• Color
• Veining
• Mineral markings
• Pattern density

For larger programs, Teruier can establish stone-selection standards covering:

• Acceptable color range
• Vein density
• Vein direction
• Left/right visual coordination
• Natural variation limits

These standards should be confirmed during sampling and pre-production approval.

Materials and Construction

NM06 combines:

Natural Marble + Reinforced Stone Backing + 5 mm Silver Mirror + Aluminum Frame + Concealed Rear Structure

The natural marble is recommended to be fully bonded to an aluminum honeycomb or reinforced lightweight composite backing.

This construction helps control:

• Overall weight
• Stone stability
• Transportation risk
• Installation load
• Bulk-production consistency

A reinforced rear metal structure supports the wide horizontal format and concealed wall-mounting system.

OEM and ODM Customization

Teruier supports customization for importers, furniture brands, hospitality suppliers, and project buyers.

Available options include:

• Overall dimensions
• Natural marble type
• Marble color
• Vein direction
• Stone module width
• Champagne-gold finish
• Alternative metal finishes
• Mirror thickness
• Safety backing
• Rear reinforcement
• Mounting system
• Retail packaging
• Project packaging
• Private-label branding

Custom dimensions are subject to review of structural strength, weight, stone stability, packaging, and installation requirements.

FAQ

Q: Is the marble real natural stone?
A: Yes. Genuine natural marble is used.

Q: What is the standard size?
A: 1200 × 600 × 30 mm.

Q: Is a larger version available?
A: Yes. 1400 × 700 mm is available.

Q: What is the MOQ?
A: 20 pcs per size and finish.

Q: What is the lead time?
A: Approximately 30–60 days.

Q: Can the size be customized?
A: Yes, after structural review.

Q: Can both marble ends match perfectly?
A: No. Natural stone varies by slab.

Q: Is paired stone selection available?
A: Yes, with additional selection cost.

Q: Is the inner gold divider raised?
A: No. It is designed to remain flush.

Q: Can NM06 be used above a double vanity?
A: Yes. The horizontal format is designed for this use.

Q: Can the metal finish be changed?
A: Yes, subject to MOQ and finish availability.

Q: Is private-label packaging available?
A: Yes. OEM packaging is supported.

For Importers, Hospitality Suppliers, and Project Buyers

TMR27-NM06 is designed for buyers who need a horizontal mirror that combines genuine natural marble, large functional mirror area, repeatable production, and project-level customization.

For quotation, please provide:

• Required size
• Order quantity
• Preferred marble
• Metal finish
• Destination port
• Packaging requirements
• Applicable project or safety standards